How To Make An AK 47 Full Auto – Easy & Affordable

The AK 47 is a selective rifle that means it can be used as a semi – automatic and full – automatic. It also known as Kalashnikov rifle. This is one of the most popular in the world of the gun market. Most of people like armies, shooters and hunters know the AK 47. It is an easy using rifle with everyone because they can try to use this rife in one hour.

Before understanding how to make the AK 47, you should catch two points. First of all, you need to have proper license when you are going to use the rifles. In most civilized countries, they have various regulations about using handguns and rifles. Therefore, you should ensure these laws in your regions. Secondly, you need to set full auto parts. Thirdly, you should create full automatic bolt carrier. You could have a look at some best bidpods and scopes for AK47 that we listed.

When you have license, you can find full auto parts. Because there are many kinds of AK 47, this article focused on 7.62 x 39. Most of the clones of AK are interchangeable (except the Galil.308 and the Galil.203)

If you want to have exact auto part, you would buy one metal template and make hole in the set. You begin install the auto part. It is not difficult to set up this auto part. Firstly, you make the hole (with 7mm) on the left side of the receiver. On the right side, you make a 5mm hole. You need to separate the receiver because of the security of the template on the left side. To do this point, you move the axis pins in the holes that marked in 3 and 4. Then, you mark the hole in number 2 by using a scribe to make a circle.

Secondly, you replace the slave pins and the template. You move the template on the opposite side of the receiver. Do not forget to scribe the 2 hole and punch it at the center. Thirdly, you drill the left side of the receiver with the larger of the two bits. Then, you take and move the template carefully on a table. Then, you concentrate on the slotting of the bolt carrier guide rail of the receiver wall. If you look down your separated AK and you have the muzzle on the left side, you will see the template like this

As you can see in the picture, the dark area is a place you will remove metal from the bolt carrier guide rail. You need to do this task for the trip arm of the automatic sear. It will project above the rail and engage a cam on the bolt carrier. It produces the automatic fire when the selector level is moved in the middle position. You should slot it instead of cutting it because it is neater. You drill a series of 1/16” holes near the receiver wall. You can cut the web between them and using a Swiss file.

Your rifle could have a restrictor on the right side of the receiver, it depends on the manufacture. This is not useful piece of folded metal above the magazine that can prevent the selector in the lowest position. It could be cut and the selector lever can pass behind this point in the picture

Then, you change the restrictor device. You may make detent for the selector lever to move into it. You can make with a light mill cut. Do not cut through the receiver wall. It could be make with a light ¼” drill. Remember to block inside the receiver by wood backing or use an aluminum hit. The detent located under the existing detent at the height of axis hole of number 2 (you can see in the picture).

If you do not have full automatic bolt carrier, you can make or buy it. There is difference between the semi – automatic carrier and the full – automatic version.

The difference is a semi – automatic rifle does not have the sear trip cam. It is a small projecting surface as you can see above. The illustration describe a dimension of the cam which a welder could build up on the semi – automatic cam. And a machinist can mill it to the dimensions.

If you could not access to a machine shop, you totally buy a full – automatic carrier. Before buying one, you should take a look at the following list:

  • 223 rifles have a semi – automatic carrier
  • 308 rifles could not be converted by using the AK 47 full – automatic and replacing sets of part.
  • Most of the Valmet rifles have a full – automatic carrier
  • MAADI rifles have a full – automatic carrier
  • Yugoslave rifles have a semi – auto bolt carrier
  • Hungarians have a full – automatic carrier
  • Chinese rifles have a semi – auto carrier
  • South – African rifles have a full – automatic carrier

After reading these above lists, are you ready for separated? You install the automatic sear and the sear spring in the receiver by inserting the axis pin in these parts. Then, you use the famous AK 47 slave pin to gather the trigger, dis – connector spring, and you put this part into the receiver. You also raise the automatic sear spring above the trigger axis hole and enter the trigger axis pin. This process will remove the AK47 slave pin. After that, you collect the full auto hammer, the hammer spring and put them into the receiver. Besides, always bring a good AA flashlight with your AK, so you can be more tactical at night.

On the one hand, you need to use a screw driver to depress the automatic sear spring below the hole of hammer axis pin. Moreover, you need to enter the hammer axis pin, hook the tail end to make loops of the hammer spring over each side of the trigger. While hearing, you may wish to have three heads and six hands to do this job. In fact, it is not difficult than you may thought.

When you have completely assemble full – automatic lower of the receiver, the automatic sear spring contains all of the axis pins in the receiver. After making these parts, you could have a select fire rifle. The selector is moved in the upper position, you could realize that the rifle is safe. When it placed in the lower position, this is a semi – automatic. And when the selector moved in the middle position, you will have the full – automatic AK 47 rifle.

The AK 47 is not expensive in the gun market. The AK 47 and its parts made in several countries. It designed as simple, available (price) and easy weapon. Furthermore, it is so hard to break. The manufactures are going to produce these rifles without impediment. Finally, we also give away some 18650 flashlight for our fans, you can have a look.

You may also like...